|
|
|
|
Pneumatic Apparatus for Manufacturing Equipment |
|
|
|
Pneumatic Apparatus for Manufacturing Equipment
|
Air Preparation Units clean air from solid particles and water, provide pressure control and pressure keeping, allow application of sprayed oil into compressed air.
Produced with internal diameters of Äó 12, 16 and 25 mm and in different bundling.
ÁÏÂ101040, ÁÏÂ 101050,
ÁÏÂ101640, ÁÏÂ 101650,
ÁÏÂ 102550
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Double-Sided Pneumatic Operation
|
|
Provide control over directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: ÄÓ 4, 8, 12, 16, 20 and 25 mm.
Working pressure range: 0.2 - 1.0 MPa. Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate:
P - threaded opening on the plate's bottom
Á - block plate allows grouping of Pneumatic Control Valves into piles (blocks)
Ñ - threaded opening on the plate's side
ÏÐ240421Ð/Á/Ñ ÏÐ241221Ð/Á/Ñ
ÏÐ242021Ð/Á/Ñ ÏÐ240821Ð/Á/Ñ
ÏÐ241621Ð/Á/Ñ ÏÐ242521Ð/Á/Ñ
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Single-Sided Pneumatic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 4, 8, 12, 16, 20, 25 mm.
Working pressure range: 0.2 - 1.0 MPa. Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate:
P - threaded opening on the plate's bottom
Á - block plate allows grouping of Pneumatic Control Valves into piles (blocks)
Ñ - threaded opening on the plate's side
ÏÐ240411Ð/Á/Ñ ÏÐ241211Ð/Á/Ñ
ÏÐ242011Ð/Á/Ñ ÏÐ240811Ð/Á/Ñ
ÏÐ241611Ð/Á/Ñ ÏÐ242511Ð/Á/Ñ
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Double-Sided Pneumo-Differential Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 12, 16, 20, 25 mm.
Working pressure range: 0.2 - 1.0 MPa. Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate:
P - threaded opening on the plate's bottom
Á - block plate allows grouping of Pneumatic Control Valves into piles (blocks)
Ñ - threaded opening on the plate's side
ÏÐ240428Ð/Á ÏÐ241228Á/Ñ
ÏÐ242028Ð/Á ÏÐ240828Á
ÏÐ241628Ð/Á/Ñ ÏÐ242528Ð/Á
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Single-Sided Pneumo-Electronic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 4, 8, 12, 16, 20, 25 mm.
Working pressure range: 0.2 - 1.0 MPa. Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate.
Power consumption:
- DC Voltage 24V - 7W
- AC Voltage 100V and 220V - 9W and 13W respectively
ÏÐ240412Ð/Á ÏÐ241212Ð/Á/Ñ
ÏÐ242012Ð/Á ÏÐ240812Ð/Á
ÏÐ241612Ð/Á/Ñ ÏÐ242512Ð/Á
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Double-Sided Electronic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 4, 8, 12, 16, 20, 25 mm.
Working pressure range: 0.2 - 1.0 MPa. Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate.
Power consumption:
- DC Voltage 24V - 7W
- AC Voltage 100V and 220V - 9W and 13W respectively
ÏÐ240422Ð/Á ÏÐ241222Ð/Á/Ñ
ÏÐ242022Ð/Á ÏÐ240822Ð/Á
ÏÐ241622Ð/Á/Ñ ÏÐ242522Ð/Á
|
Pneumatic Control Valves 5/2 (Five Ports, Two Positions) with Single-Sided Electronic Operation
(without plate; threaded openings on the body)
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
Internal diameters: 12, 16 mm.
Working pressure range: 0.2 - 1.0 MPa.
Minimum pressure: 0.2 MPa
Power consumption:
- AC Voltage 100V and 220V - 9W and 13W respectively
ÏÐ241212ÐÊ-220
|
Pneumatic Control Valves 5/3 (Five Ports, Three Positions) with Pneumatic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 12, 16, 20, 25 mm.
Working pressure range: 0.25 - 1.00 MPa.
Minimum pressure: 0.25 MPa.
The modifications differ in positions of threaded openings on the plate.
ÏÐ252011Ð/Á
ÏÐ251611Ð/Á/Ñ ÏÐ252511Ð/Á
|
Pneumatic Control Valves 5/3 (Five Ports, Three Positions) with Pneumo-Electronic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 12, 16, 20, 25 mm.
Working pressure range: 0.25 - 1.00 MPa.
Minimum pressure: 0.25 MPa.
The modifications differ in positions of threaded openings on the plate.
Power consumption:
- DC Voltage 24V - 7W
- AC Voltage 100V and 220V - 9W and 13W respectively
|
Pneumatic Control Valves 5/3 (Five Ports, Three Positions) with Manual Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
The size of connecting surface complies with ISO 59911.
Internal diameters: 12, 16 mm.
Working pressure range: 0.25 - 1.00 MPa.
Minimum pressure: 0.2 MPa.
The modifications differ in positions of threaded openings on the plate.
ÏÐ251224Ð/Á/Ñ ÏÐ251624Ð/Á/Ñ
|
Pneumatic Control Valve Blocks of "ÁÏÐ" Type
|
|
Allows changing directions of compressed airflows directed simultaneously or sequentially by several actuators.
The size of connecting surface complies with ISO 59911.
Internal diameters: 4,8 12, 16, 20, 25 mm.
Rated working pressure - 1.0 MPa.
Number of Pneumatic Control Valves in a single block: 2 - 6
|
Pneumatic Control Valves 3/2 (Three Ports, Two Positions) with Pneumatic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
Valve-type construction.
Internal diameters: 12, 16, 20 mm.
Working pressure range: 0.2 - 1.00 MPa. Minimum pressure: 0.2 MPa.
ÏÐ311201
ÏÐ311601
ÏÐ312001
|
Pneumatic Control Valves 3/2 (Three Ports, Two Positions) with Pneumo-Electronic Operation
|
|
Allows changing directions of compressed airflows in the pneumatic circuits of manufacturing equipment.
Valve-type construction.
Internal diameters: 12, 16, 20 mm.
Working pressure range: 0.2 - 1.00 MPa.
Minimum pressure: 0.2 MPa.
ÏÐ311202
ÏÐ311602
ÏÐ312002
|
|
Pneumatic Safety Valves are designed to provide fast and reliable connection of the consumer to the pneumatic network as well as fast disconnection from the network.
Internal diameters: 12, 16, 25 mm.
Working pressure range: 0.25 - 1.00 MPa.
Minimum pressure: 0.25 MPa.
ÏÊÁ 141204
ÏÊÁ 141604
ÏÊÁ 142504
|
Pneumatic Cylinder 11.800400100.000 ÒÓ Ó Ç 25-00232124-017-93
|
|
Pneumatic Cylinder is used to convert the energy of compressed air into alternate motion of the push rod in the pneumatic circuits of manufacturing equipment and rigging, working with pressure not exceeding 1±0,05MPa (10±0,5kg/cm2).
Cylinder diameter: 40mm.
Push rod travel: 100mm.
Features a stroke limit feedback system. |
Closing Plates for connecting Modular Five-Port Pneumatic Control Valves into blocks
|
|
ÁÏ3- 1 1/4"- 0-00001
ÁÏ3- 1 1/4"- 0-00002
ÁÏ2 - 3/8" -0-00001010
ÁÏ2 - 3/8" -0-00002010
ÁÏ3-1" - 0 - 00001
ÁÏ3-1" - 0 - 00002 Plates
ÁÏÇ-1-1/4"-0-00001 and ÁÏ3 1 1/4"-0-00002 are used for locking Pneumatic Control Valve blocks, consisting of 5/2 or 5/3 with internal diameters of 20 or 25 mm.
Plates ÁÏ2-3/8"-0-00001010 and ÁÏ2-3/8"-0-00002010 are used for locking Pneumatic Control Valve blocks, consisting of 5/2 or 5/3 with internal diameters of 4 or 8 mm.
Plates ÁÏ3-1"-0-00001 and Áï3-1"-0-00002 are used for locking Pneumatic Control Valve blocks, consisting of 5/2 or 5/3 with internal diameters of 12 or 16 mm.
|
|
Copyright © PJSC "Poltava Automobile Unit Plant", Poltava, Ukraine |
|
|
|
|
|
|
|